Set as homepage
Add to favorites
Download Magic Packet Utility for windows
Download freeware version of Magic Packet Utility
On this page you are able to download Magic Packet Utility program of windows section of network protocols category, as well as familiarize with its brief description, operating system type, kind of license and a program popularity rating. Here is also the information about previous user views and a program product downloads amount. In order to download Magic Packet Utility you have to enter the confirmation code in the appropriate form and click on the "Download Magic Packet Utility" link. The download will begin in a few second in case of correct code input.
If you are not convenient with the version or license type you are able to choose similar program products making use of links represented below or going back to windows section.
Magic Packet Utility, Freeware
File info:
File size: 40 KB
OS:
License: Freeware
Rating: 0
Views/Downloads: 423/0
OS:
License: Freeware
Rating: 0
Views/Downloads: 423/0
Magic Packet Utility
--------------------------------------------------------------------------------
There are a lot of different "Magic Packet" tools that can be used to turn computers on remotely, but sometimes it's necessary to have a simple tool, that can be started from command prompt or be included in a batch file.
Usage
It requires only two command-line parameters.
First is network broadcast address. This should be a broadcast IP address of the network to which the target computer is connected. UDP packets sent to this address must be able to reach the target computer. For example, if your target computer's network address was 192.168.0.15 and network mask is 255.255.255.0, the network's broadcast address would be 192.168.0.255. If you are in the same network segment, you can use 255.255.255.255. The second is "physical" MAC (Media Access Control) address. To obtain target computer ethernet adapter's MAC address, run
ipconfig /all
on the target computer. So, the command line should look like this:
WakeIt 192.168.0.255 00-a0-15-65-5e-34
This Magic Packet Utility can be downloaded here.
--------------------------------------------------------------------------------
There are a lot of different "Magic Packet" tools that can be used to turn computers on remotely, but sometimes it's necessary to have a simple tool, that can be started from command prompt or be included in a batch file.
Usage
It requires only two command-line parameters.
First is network broadcast address. This should be a broadcast IP address of the network to which the target computer is connected. UDP packets sent to this address must be able to reach the target computer. For example, if your target computer's network address was 192.168.0.15 and network mask is 255.255.255.0, the network's broadcast address would be 192.168.0.255. If you are in the same network segment, you can use 255.255.255.255. The second is "physical" MAC (Media Access Control) address. To obtain target computer ethernet adapter's MAC address, run
ipconfig /all
on the target computer. So, the command line should look like this:
WakeIt 192.168.0.255 00-a0-15-65-5e-34
This Magic Packet Utility can be downloaded here.